Top 4 Electrical Safety Tips that Every Home Owner Needs to Know

As per the United States Consumer Product Safety Commission (USCPSC) estimates, more than 30,000 home electrical fires cases are reported annually across the country. Most of these mishaps involving electric shocks and accidents can be easily averted by following simple safety tips.

Primary causes of electrical fires at home

The National Fire Protection Association (NFPA) records that approximately 70% of the home electrical explosions or fires are triggered by defective or broken cables and associated electrical accessories. Always ensure to consult a Professional Electrician Roswell when you are looking for ways to remove all the potential fire hazards from your place.

Here are the top 4 measures that every homeowner must learn and observe to ensure electrical safety at home. In case of any doubt, get in touch with you local electricity expert without further delay. 

Installing correct wattage fixtures: Using the right power devices is the sure-shot way to avoid most of the electrical issues. So, before you decide to plug in or mount a lamp, appliance, or bulb, make sure that its wattage is appropriate- Watt is a power unit that is usually specified on the device packaging and fixtures.

In case, no power value is specified on a light fixture, you may go with a 60-watt or a lesser power bulb.

Keep a guard on overloading and heated outlets: A frequent cause of electrical mishaps is the overloading of the outlets. You can test this by regularly checking all sockets to ensure that they're cold to the touch, have safety faceplates in place, and are working properly.

Use the following tips for preventive control:
1. Avoid the use of multi-outlet extensions for high power-consuming appliances.
2. Plugin only one heat emitting appliance in an outlet at one time.
3. On discovering heated outlets, immediately call a qualified Electrician Roswell.

Immediately replace damaged cords: Compromised power cables are a danger to domestic electrical safety and could cause both explosions and electrocution. All power sources and extensions should be scrutinized for symptoms of creasing or breakage regularly- in wake damage detection, they should either be repaired immediately or replaced entirely.

Unplug unused appliances: Interestingly, one of the simplest household electrical safety tips is often the most ignored one- unplug the device when no longer in use.

Not only it can save you power (yes, your appliance consumes energy even when not in active use but plugged in), but it will also protect the device from damage due to high voltage and overheating. To know more about electrical safety mechanisms and book an appointment, get in touch with our expert Electrician Roswell.

5 Electrical Safety Tips for Your Home That You Need to Know Now

Electricity is an indispensable part of our lives without which survival is pretty much unthinkable- It helps us keep cosy, our homes well-lit and our food hot. However, that doesn’t mean that electricity is completely risk-free to use- bad circuits or mishandling of any sort can even result in serious consequences. As per the U.S. Consumer Product Safety Commission (CPSC) reports, electrical sockets are involved in more than 5,500 fire incidents every year resulting in deaths and injuries of different sorts. Also, if statistics are to be believed, more than 65% of home fire deaths are caused due to the absence or malfunctioning for fire detectors in the premises.

Hence, it becomes imperative to resolve all the prevailing electrical issues in time by involving an expert and professional Electrician. Here are some safety tips which you can employ to keep your loved ones and yourself away from the electrical dangers.

1. Replacing /Repairing Naked Wires: At the first sighting of damaged wiring, your first instinct should be to repair the exposed part immediately. You may use a certified PVC tape to accomplish the task. However, before starting the mending process, ensure that the faulty wire is unplugged from the socket. In case the damage is extensive, call your local Electrician for immediate replacement.

2. Preventing Outlet Overload: Plugging in too many devices in the same power outlet could exhaust its capacity, resulting in an explosion or fire. Every outlet has a bearing capacity hence it is imperative that you must plug in your devices evenly. In the case of too many gadgets, installing a power strip may resolve the problem.

3. Avoid Extension Cords: A web of wires running across your home via an extension cord could cause someone to trip and get injured in the process. A viable solution to this is to install more power outlets to support your increased plug-in demands.

4. Avoid Contact With Water: Water is a good electricity conductor. Hence, prevent the outlets and plugs from getting wet. In case of spills, switch off the power and wipe all the liquid immediately. 

5. Be Attentive of Kids and Pets: Kids and pets are a curious lot, they move around the house checking out everything. Have safety caps in place for all the unused outlets. Also, pull up the chords and place them in a safe location which is out of reach for your little ones.

If you are looking for an expert Electrician in your vicinity, visit our website now.

When is the Right Time to Call an Electrician in Atlanta?

No matter how tempting it may be to attempt DIY home repairs, it can even be dangerous if you try to attempt them yourself. This applies especially with electrical work. When you have problems in your house, you might feel that you have no other choice but to tackle the predicament yourself. While you’re not alone. Many individuals do the same. Since electricity is not something to be played with, it makes sense to get in touch with a reliable electrician in Atlanta who can perform the job effectively. 

In this post, we will be giving you several situations where it is necessary not to perform the job on your own and leave it to the professionals. 

Need to install new outlets:

Installing new outlets is not something you should try to fix on your own. Since electricians are expert in their jobs, which means they can perform the job meeting the highest standards of quality.  Trying to install the outlets can lead to adverse affects such as fatal shocks and fire. 

Flickering lights:

If you have flickering lights in your house, you should immediately contact a professional. Only a trained electrician would be able to track down the point source of the problem, which could be poor wiring or faulty fixture and suggest appropriate solutions.

Exposed or hanging wires:

Sometimes wires can be left out and dangling after a renovation. It can prove out to be extremely dangerous as this can present a fire hazard. An electrician will be able to assess the situation and properly attach the wires to structural framing.

Bill out of control:

 If your electricity bill is out of control, it is a good time to bring in an electrician. He will be able to determine the energy efficiency of your home and suggest any upgrades and replacements that could lower the power usage of your home. 

A reliable electrician in Atlanta can get things done right the first time because they know what they’re doing. 

Get in touch with the experts at Mr. Electric of Atlanta if you are looking for an electrician. They can help you install lights, repair breaker, install landscape lighting and much more. Visit the website today for more information.